Private website concept.

Skyfox Solar

San Jose, California

San Jose solar installer, sized to your evening use

Skyfox Solar is a design-and-install service for San Jose homeowners on PG&E and San José Clean Energy. A quote would start from a year of your hourly use: solar sized to daytime needs, plus an optional 4–9 p.m. battery on its own line. Under net billing, when you use power decides what pays.

  • For San Jose homeowners on PG&E and SJCE
  • Solar sized to your hourly use
  • Optional evening battery priced on its own line

Get your free quoteTry the evening gap check

Solar panels across the roofs of a three-storey residential building at sunset, its upper windows reflecting the evening light.
Solar output Household use Peak 4–9 p.m. on PG&E’s E-ELEC rate Shapes are illustrative, not a forecast.
  • 5.0 from 6 reviews
  • San Jose, CA
  • (408) 461-8941

San Jose, California

Solar sized to your evenings, not your year

Skyfox Solar designs for San Jose households on PG&E and San José Clean Energy, where the 4-to-9 p.m. rate makes the hourly shape of your use matter more than the yearly total.

What customers say

Skyfox SolarSolar design and installation · San Jose, CA

Serving San Jose and nearby towns

★★★★★5.0 from 6 Google reviews

What we do

What we do

  1. Evening-use designAn array sized to the hours you actually draw power, not the yearly total.
  2. Hourly load analysisA year of interval data plotted against a summer and winter day.
  3. Battery for the 4–9 peakStorage sized to the evening gap and priced on its own line.
  4. Utility interconnectionPG&E or SJCE application and the permission to operate.

Call or visit

Talk to us

Phone(408) 461-8941Call to book an assessment.
Office75 E Santa Clara St Ste 900, San Jose, CA 95113Parking on site.
EstimatesFree, in writingDesign and price as separate documents.

Get your free quote

Why homeowners pick us

Why homeowners pick us

  • Hourly, not annualA yearly average hides the window that costs you money.
  • Battery optionalEvening self-supply is priced separately, so you can decline it.
  • Free written estimateA design and a price before you commit to anything.

Our story

Our story

  1. Installing across San Jose, Santa Clara, Campbell, Milpitas and Sunnyvale.

Two lines on every quote

Solar is sized to the hours you use power while the sun is up. A battery is a separate, optional line for the evening. You see both prices before you choose.

See the five steps
  • Rows of dark solar panels on a clay tile roof under a clear sky.

    Option A Solar sized to daytime use

    An array sized to what you use while the sun is up, plus the loads you can move into those hours, with its own cash price and price per watt.

    Price Option A
  • 4–9 p.m. Midday

    Option B Add an evening battery

    Optional and on its own line: a battery sized to the 4–9 p.m. kWh your solar does not cover, with usable kWh, discharge kW and reserve in writing.

    Price Option B

From your hourly data to switch-on

The proposed service in five steps. Each one ends with something you can check.

  1. Download your hourly use

    Twelve months of hourly or 15-minute data from your utility account.

  2. Assessment visit

    Load shape, evening loads that could move, roof faces and the main panel.

  3. Options A and B in writing

    An hourly match chart, two price lines and the price per watt.

  4. Permit and installation

    The city permit, the install and the inspection, with who files each.

  5. Permission to operate

    The utility's approval to switch on, then monitoring from day one.

Three installers fitting black solar panels onto a red tile roof on a sunny day.

Evening gap check

Type your own numbers: the kWh you use from 4 to 9 p.m. on a typical day, and the battery figures on a quote. The check shows whether the battery covers the evening and keeps up with your busiest hour.

It uses only what you type, and nothing is sent. It is not a sizing: battery losses, winter recharging and rate details are left out.

Your evening
Battery on the quote

Covers the 7.0 kWh evening gap with 1.0 kWh to spare.

5.0 kW of discharge keeps up with a 3.0 kW busiest hour.

10 kWh usable × (100% − 20% reserve) = 8.0 kWh each evening

Under net billing, the clock decides the size

Before you agree to a system size, find out what share of your electricity you use between 4 and 9 p.m. That share matters more than your yearly total.

PG&E customers who apply for solar interconnection on or after April 15, 2023, go on the CPUC's Net Billing Tariff, which PG&E calls the Solar Billing Plan. Net billing means you buy grid power at your rate plan's price, while the power you send back earns an export credit that changes by hour and month, with values locked for nine years. You must also take E-ELEC, PG&E's electrification time-of-use rate: Peak 4–9 p.m., Partial Peak 3–4 p.m. and 9 p.m. to midnight, Off-Peak midnight to 3 p.m., every day of the week.

Panels produce most at midday, the cheap end of that clock. If your household uses much of its power in the evening, that is when PG&E says export credits are highest and grid power costs the most. A system sized to your annual kWh can still leave you buying the expensive evening hours while it sells cheap midday ones.

Oversizing doesn't fix that. PG&E's solar getting-started page says there is "no financial benefit to installing a system larger than your home needs." The CPUC's consumer guide goes further: a system that covers all of your use isn't necessarily the best investment, and systems are typically sized to around 80–85% of last year's use. A quote that promises to "zero out" your bill with a bigger array is selling the wrong target.

What happens to a kWh your panels make What 1,000 of them are worth (Illustrative calculation)
Used at home instead of bought About $323, at California's average residential price of about 32.34¢ per kWh (EIA data via EcoGen, September 2025 to August 2026)
Left over at San José Clean Energy's April true-up $35.75, at SJCE's Net Surplus Compensation rate of $0.03575 per kWh (as of April 1, 2026)

That is roughly 9 to 1. Two cautions: 32.34¢ is a statewide average, not your E-ELEC price, and the year-end rate applies only to surplus left at true-up; exports during the year earn hourly credits.

So size solar to the power you can use at home or credit within the year. Then decide separately whether the 4–9 p.m. hours are worth covering with a battery, or by moving loads to midday.

What Skyfox Solar would install, and what stays optional

How we work. Skyfox Solar would design and install solar for San Jose-area homes around one question: when does your household use power?

  • Option A, solar sized to daytime use (included). An array sized to what you use while the sun is up, plus what you can move into those hours, with its own cash price and price per watt.
  • Option B, Option A plus a battery for the 4–9 p.m. gap (optional, its own line). A battery sized to the evening kWh your solar doesn't cover, never folded into the solar price.
  • Other optional lines. Main-panel upgrade, west-facing layout premium, roof work: each shown separately.

The battery has one job in this proposal: evening self-supply. It stores midday solar for the 4–9 p.m. peak, the hours in which PG&E's Solar Billing Plan guide suggests using stored energy. Whether it also runs the house in an outage depends on the equipment and settings; if that matters, ask for it in writing.

In the City of San José, PG&E owns the wires and San José Clean Energy (SJCE), the city's community choice provider, supplies electricity by default. The design starts from that pairing's credits.

Coverage of San Jose and nearby towns covers these towns.

The assessment: what we'd check and what you'd prepare

The assessment would take about 90 minutes on site (Illustrative duration; a real operator would set it).

What you'd prepare

  • Twelve months of interval data: your use in hourly or 15-minute blocks, from PG&E's Green Button "Download My Data" or shared through Share My Data.
  • Your latest bill, which shows your supplier pair and current rate plan.
  • A photo of your main panel label, which shows its rating.
  • Your roof's age, and any plans to replace it.

What we'd check

  1. Your load shape, the hour-by-hour use on an average summer weekday (June to September, E-ELEC's summer) and winter weekday. Mark the kWh that fall 4–9 p.m. and at midday.
  2. Which evening loads could move. Cooking, laundry, the dishwasher, a pool pump, an EV, a heat pump or air conditioning. Some can shift to midday with a timer or app setting.
  3. Roof faces by orientation. West- and southwest-facing sections produce later in the day, so they're rated for late-afternoon output, not only yearly kWh. Shade, roof covering, age and setbacks go on the same sheet.
  4. Electrical capacity and battery siting. Panel rating, spare spaces, whether an upgrade is needed, and a garage or exterior-wall battery location with its clearances.

What you'd get in writing

We hand over five documents (Our service deliverables):

  • Hourly match chart. Expected production against your use on both typical days, with the share of solar used at home as a number.
  • Option A and Option B sheet. Option A: layout, DC kW (the panels' rated capacity), panel and inverter models, expected annual kWh, the export-credit year assumed, cash price and price per watt. Option B: usable kWh, discharge kW, evening hours covered each typical day, reserve setting, and bill effect against Option A.
  • "Bigger is not better" line. What one more kW would cost, and what it would mostly earn as midday export.
  • Load-shift sheet. Timer and app settings that move flexible loads to midday.
  • Responsibility sheet. The City permit route, PG&E interconnection application, rate-plan change and permission to operate, with who files each.

PG&E tells customers to compare bids on production and net cost per watt. Ask every installer for both, on the same basis.

Worked example: Option A vs Option B

Illustrative example. These are not Skyfox Solar prices or San Jose production data.

  • The household. On an average summer weekday it uses about 7 kWh between 4 and 9 p.m. The busiest evening hour draws about 3 kW, when cooking and laundry overlap.
  • Option A. A 6.0 kW DC array sized to daytime use: $16,800 solar-only ($2.80 per watt).
  • Option B. Option A plus a $13,500 battery on its own line. A battery with 10 kWh usable and a 20% reserve leaves 8 kWh for the evening, enough for the 7 kWh gap, and it needs at least 3 kW of discharge for the busiest hour.
  • Main-panel upgrade. $3,100, its own line, only if the panel can't take the new equipment.
  • Quote total with everything. $33,400.

Usable kWh is how much stored energy the battery can deliver; discharge kW is how fast. Too little kW and it can't keep up with the oven and dryer together; too few kWh and it runs out at 7:30. The reserve setting holds back part of the charge, so each evening you get usable kWh minus the reserve.

Option A Option B
Covers Daytime use, plus loads moved to midday Daytime use plus the 4–9 p.m. gap
Pays when Most solar is used at home Evening kWh are covered in each season
Hourly chart must show Midday use against midday output Whether midday surplus recharges the battery in winter too

The tempting alternative is to skip the battery and add panels. Each extra kW costs about $2,850 (Illustrative calculation at the state benchmark below), and on an array already sized to daytime use it mostly adds midday exports. If those credits outrun your use by year end, the leftover earns $0.03575 per kWh from SJCE.

Option B isn't automatically right either. Suppose the same illustrative household moves laundry and the dishwasher to midday and the gap drops to 4 kWh. A smaller battery, or none, may then fit better. That is why the load-shift sheet comes before the battery line, not after it.

The battery choice can also change the paperwork. Next door, Milpitas sorts solar permits by whether a battery is included.

Is the solar line fairly priced?

Remove the battery, panel upgrade and roof work, then divide what's left by the DC watts on the quote. DC watts is our assumption; ask the installer to confirm the basis.

Step Illustrative calculation
Quote total $33,400
Remove battery and panel upgrade − $13,500 − $3,100
Solar-only price $16,800
Divide by DC watts $16,800 ÷ 6,000 W = $2.80 per watt
State benchmark $2.85 per watt
Same quote, blended $33,400 ÷ 6,000 W = $5.57 per watt

EcoGen's California solar cost benchmark is $2.85 per watt (State benchmark, EcoGen Solar Cost Index, September 2026 Edition, prices as of September 25, 2026), for a host-owned system of about 6.70 kW, cash before incentives, solar only, battery priced separately. It's a modeled installed price per watt, not a quote for your home, and EcoGen doesn't say whether it is per DC or AC watt.

The example's $2.80 is $0.05 below the benchmark, about 1.8%: in line. The blended $5.57 would look 95% above it, yet that's battery and panel money divided by solar watts. Compare a blended figure with a solar-only benchmark and you could reject a fair quote, or miss an overpriced battery.

Some San Jose cost figures published online don't state whether they include a battery or which tariff they assume. Treat them as leads, not benchmarks.

What else moves a San Jose quote

Inside the solar line, panels, racking, inverter and labor set the price; a west-facing layout may add a premium, which belongs on its own line. Outside it, the battery is priced by evening kWh and discharge kW, the panel upgrade by your panel's rating, and roof work by roof age. Ask whether the permit fee is included.

Incentives in 2026

The IRS Residential Clean Energy Credit "is not available for any property placed in service after December 31, 2025." A 2026 quote that still subtracts 30% for a system you own is wrong. With a lease or power-purchase agreement, the provider may claim a business credit on its side; ask how much reaches your price.

PG&E's guide lists an Energy Export Bonus Credit of about 0.9¢ per kWh for 2026, falling to about 0.4¢ in 2027. PG&E says the value is set at permission to operate; the CPUC ties the adder to applying before the end of 2027. Ask which year's value the quote assumes.

From signed quote to switch-on in San Jose

San Jose requires a building permit before solar panels or a battery go in. The City's Development Services Permit Center handles both, and its solar and storage battery permit page sets two routes. Ask which one your project takes.

  1. Settle the roof. The CPUC's Solar Consumer Protection Guide advises replacing it first if it's due soon; removing and reinstalling panels later costs extra.
  2. Check historic status. For a house on San José's Historic Resources Inventory, the permit includes a planner review. A City Landmark or Landmark District property needs a Historic Preservation (HP) Permit, or an HP Permit Adjustment for minor work such as reroofing; a Structure of Merit, Contributing or Identified Structure, or Conservation Area property needs a Single-Family House Permit. See the City's permits for projects with historic resources.
  3. Find the permit route. A rooftop array on a single-family home, duplex or townhouse can be permitted online through SJPermits if panels and frames weigh under 5 lb per square foot, each support point carries under 40 lb, panels sit no more than 18 inches above the roof, and the array isn't ballasted. Anything else goes to Standard Plan Review: apply at SJPermits and upload site, framing, anchorage, weatherproofing and electrical plans through SJePlans.
  4. Add the battery permit for Option B. It needs a City-approved anchorage detail, the bracket fixing the battery to a wall or floor. The City inspects that anchorage, typically before the battery goes in.
  5. Check the extras. A Geologic Hazard Clearance, flood-zone review or Tree Removal Permit applies only if your property triggers one. With an HOA, check your CC&Rs.
  6. Sign the PG&E Interconnection Agreement. The installer prepares the application; you sign.
  7. Install, then inspect. Your Permit Card lists the inspections, scheduled through SJPermits. The inspector reviews the electrical plan on site; equipment must be listed and labeled, manufacturer instructions on site, and PV system voltage no higher than 600 V. Then comes the final building permit.
  8. Wait for PG&E's written permission to operate.

The City recommends a licensed contractor and warns that whoever signs the permit is responsible for the work. Routes differ next door: in Campbell, the roof covering decides the permit route.

PG&E and SJCE: interconnection, PTO and two true-ups

Check the name on your bill. In the City of San José, PG&E delivers and SJCE supplies unless you've opted out to PG&E supply. Unincorporated county pockets inside the city's outline are on Silicon Valley Clean Energy (SVCE), the same supplier as Sunnyvale, which settles solar credits differently: see SVCE's monthly rollover and spring cash-out. A Santa Clara address is on Silicon Valley Power, that city's own utility, outside the CPUC's net billing rules; see how Silicon Valley Power pays for solar.

Getting to permission to operate

After the City's final inspection, the installer sends PG&E the interconnection application, a single-line diagram (a one-page wiring drawing) and the final building permit. PG&E charges a $145 interconnection fee, upgrades your meter and sends written permission to operate (PTO), typically 5 to 10 business days later and up to 30. Don't switch on before PTO arrives in writing.

On the Solar Billing Plan, PG&E enrolls you in E-ELEC automatically; its winter runs October to May.

Two bills, two true-ups

SJCE's solar billing page explains the split. SJCE bills generation monthly, rolls unused credits forward and trues up every April. PG&E trues up delivery separately, on its own date.

At SJCE's April true-up, surplus earns $0.03575 per kWh (as of April 1, 2026) as a bill credit; SJCE says that is 25% higher than PG&E's rate. Move or close the account and excess credits are forfeited at the final true-up. SJCE also reports that 75% of its existing solar customers use more than they produce over the year, with an average residential true-up of about $600 owed. Plan for the April bill.

One line stays on the bill whatever the panels make. PG&E's Base Services Charge, $24.15 a month for most customers since March 2026, can't be offset by solar credits. Ask the installer to show it on the bill estimate rather than leave it out.

After switch-on: monitoring and warranty questions

Use monitoring to check the design as well as the output. In the first summer, see when exports land: Option A should export mostly at midday. With Option B, the battery should discharge between 4 and 9 p.m.; if it sits full through the evening, check the settings.

The CPUC guide lists the aftercare questions worth settling before you sign. Keep the answers with your PTO letter:

  • What do the panel, inverter and battery warranties cover, for how long, and who do I call?
  • What would an inverter replacement cost after its warranty?
  • Is there a labor warranty on the installation?
  • What monitoring is included, and is there a minimum production guarantee?
  • Who files a warranty claim, and what insurance does the installer carry?

Questions to ask before you sign

Put these to every San Jose solar installer you're comparing, and ask for the answers in writing. The quote checklist on this site holds the same points in a form you can fill in.

Sizing

  • Which 12 months of interval data is the size based on, and what share falls 4–9 p.m.?
  • What share of the solar is used at home on a summer and a winter weekday?
  • What would one more kW earn, at which credit?

Price

  • What is the solar-only price per DC watt, with battery, panel upgrade and roof work on separate lines?
  • Does the savings estimate assume NEM 2.0? A new 2026 quote shouldn't.
  • Does it still subtract a 30% federal credit for a system I'd own?
  • Which year's bonus credit does it use?

Your California rights

  • Have I signed the CPUC Solar Consumer Protection Guide? Contracts signed on or after December 15, 2026, need Version 4, with your signatures and initials, for PG&E interconnection.
  • Have I received the CSLB Solar Energy System Disclosure Document?
  • Is the contractor licensed C-46, C-10 or B? Check on the CSLB license lookup.
  • Do I have three business days to cancel, or five if I'm 65 or older?
  • What yearly rise in electricity rates does the savings estimate assume? The CPUC caps that assumption at 10% a year.

Payment

  • Is the down payment no more than $1,000 or 10%, whichever is less, as PG&E advises?
  • Is final payment due only after the system is installed and operating?

Short answers for San Jose homeowners

Is the 30% federal tax credit still available?

Not for a system you own placed in service after December 31, 2025, whatever some listings still say.

Can I still get NEM 2.0?

Not as a new customer. PG&E moved NEM 2.0 applications not cleared by April 14, 2026, to the Solar Billing Plan. Existing NEM 2.0 customers keep their tariff for 20 years from interconnection.

Isn't a battery mainly for backup?

Not in this proposal. Option B covers the 4–9 p.m. peak with your own midday solar. Outage use depends on equipment and settings.

Will solar raise my property tax?

As of November 2026, California's active solar exclusion keeps a new system's added value out of your assessment if it's completed before January 1, 2027, per the Board of Equalization. A 2027 completion isn't covered unless the law changes.

On this page11 sections

Four nearby town guides

Each guide covers the local utility, permit and housing questions that change an evening-use design. Coverage of every town is proposed and not yet confirmed.

Get your free quote

Pick your town and what you want priced. The page builds a checklist to take into any installer's quote visit, so every bid answers the same questions.

This is a concept: the checklist runs on this device. Nothing is sent or stored, and no one will contact you.